How To Set Up A Foosball Table – Assembling Guide

Last Updated on March 26, 2023 by

We are reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More.

One of the main concerns that people have when they think about buying a foosball table is how to install them. No one wants to spend days trying to set up a foosball table, and luckily, you don't even have to! With the right instructions, you can set up a foosball table and get to play in just about three hours.

But for this, you need to know how to set up a foosball table. There are many kinds of foosball tables available in the market. They all differ from each other and need to be installed differently. But most of the time, they have a simple and similar guideline. So if you want to know more about this process, just keep on reading.

Before you start taking out the foosball table from the box, there are some preps that you need to make. Taking these extra steps will make your foosball table assembly a lot faster.

1. Get A Friend To Help You Out

This is not a mandatory step; you can set up the table on your own as well. But we highly recommend that you get an extra hand if you have a large-sized foosball table. Holding the table in place will be much easier with help.

2. Get Your Tools Ready

Before you take start with the setup process, have all the tools that you might need, starting from screwdrivers, screws to even a cleaning cloth by your side. Having all the tools and accessories right in front of you will help make the foosball table setup more organized.

Also, check whether the tools and parts that you are using are in good condition or not. You don't want to end up with an unusable part in the middle of your setup process.

3. Be Patient

You need to keep in mind that even when all the right steps are followed, the whole process can easily take up to two hours. Don't try to get the project done before this time by speeding things if you want your foosball table to have sturdy construction.

5 Easy Steps To Set Up A Foosball Table

Now let's get to the main part of the assembly process. Here are 5 simple steps that you can follow to get the best results.

Step 1: Collect Your Foosball Table Parts and Accessories

Every foosball table will come with its instruction manual. As we have stated before, not all foosball tables are the same. Even the material and the interior design can differ at times.

Go through the foosball table setup instructions thoroughly. Then take out all the parts carefully. Check to see if you have all the components that have been mentioned as included in the manual.

Once you have all the components laid out before you, you can get the appropriate tools that you need for your foosball player setup. Keep them close throughout the installation process.

If you find the manual too difficult to read, you can try looking up the model online. We're sure if you've bought the foosball table from a well-known brand, you will find at least one YouTube video about the setup process. You could also try and contact anyone you know who has the same foosball table for some extra help.

Step 2: Get Your Foosball Table In The Right Position

This step has three parts.

Part 1: Putting The Body Together

Start with the largest part of the foosball table. As you know, foosball tables have rods that can easily slide out. By starting with the table base in front of you, you will have a better picture of where everything should go.

Part 2: Attaching The Legs

Attaching The Legs of Foosball table

There are a lot of ways in which you could do this.

You could hold the legs in place and then place the table base on top. We only recommend doing this if you have a lighter base with narrow legs. Otherwise, getting the position right can be difficult, especially if you are alone.

You could also lay the base on the floor, upside down. Then attach the legs so that they face the ceiling.

In our opinion, you will get the fastest and most efficient results by following the last method.

Here you will place the table base on the floor upside down. Attach the legs of one side of the table. Work near all walls, as the next step is to flip the table on its side. Having a wall as a rest will make the job easier. This is also safer as now there is little to no possibility of the table falling.

After this, attach the legs to the remaining side. You will find this process to be much easier now as the table has some height. No need to bend down to attach the legs to the base!

Part 3: Flipping The Table

Flipping The Table Foosball Table

If you have decided to attach the table on top of the legs, you will not have to go through this step.

This is quite a crucial step in your foosball table player setup. One wrong move in this step, and you could end up with a broken foosball table.

But if you have laid the table base down and then attached the legs, you'll have to flip the entire table.

Get someone to help you in this process. Doing it on your own will cause nothing but trouble. Push the table to a side or a wall. Rotate the table 90 degrees so that it is supported by the wall. Then slowly rotate another 90 degrees, and voila, you have your foosball table upright.

Attaching the legs while the table is resting on the side is the safest way to turn the table. It is also way less stressful and can be done by one person.

Step 3: Attaching the Rods

This is an easy step. Just insert the rods and then attach the stoppers to the end. You will also have to attach the men to the rod in this step.

Attaching the men to the rod differs from foosball tables. You might need to push them in place, or you might need to slide them through and then add stoppers.

Getting the Accessories and Set Up

Step 4: Getting the Accessories In Place

Foosball tables usually come with a lot of accessories. Keep in mind the kind of game you will be playing and assemble them accordingly; you can let your creativity flow here as you can rearrange the accessories quite easily.

Step 5: Final Touches

Add any customized component that you want. Also, remember to keep all the extra parts that came in the foosball table box safely in a box. You might need these parts during your maintenance.

And that's it! After you are done cleaning up all the mess you have made during the process, you can start playing right away!

Final overview of Foosball table

The EndNote

Now that you know just how to set up a foosball table, you can buy the table without any worries. No need to call in your buddy or a workman from the shop; set up your table on your own! It's easy, quick, and will also make the foosball table a whole lot more special.

Similar Posts You Might Read: